S4528X
S4528X
S4528X
S4528X
S4528X
S4528X
S4528X
S4528X

Layer3 24-port Gigabit Switch with 10G uplink

S4528X

  • 24* 10/100/1000M Base-T RJ45 port
  • 4* SFP/10G SFP+ port
  • RTL9301 chipset
  • 128Gbps Switching capacity

Características

10 Gigabit Aggregation

The S4500 series supports high-density Gigabit ports and 10 Gigabit SFP+ ports, Providing targeted solutions for large-flow data exchange in data centers, simplifying the network structure and reducing network maintenance costs.

Carrier-level high availability

The switch not only supports the traditional STP/RSTP/MSTP spanning tree protocol, but also supports the G.8032 international standard ERPS protocol issued by ITU-T. This standard can realize 50ms fast loop recovery under Ethernet ring network. One switch can connect to multiple aggregation switches through multiple links, significantly improving the reliability of access devices.

Layer3 routing and enhanced multi-service

Support static route
Support dynamic route such as RIP, OSPF,BGP, IS-IS
Support IPV4/IPV6 dual protocol stack,Support RIPng、OSPFv3
Support DHCP Server and DHCP Relay,L2-Tunnel
Support Ethernet OAM protocol such as CFM、EFM

Hardware based ACL control

The hardware based ACL processing mechanism is adopted to ensure the control requirements of Gigabit high-speed forwarding; it supports ACL access control from the second to the seventh layer, which can be based on the source and destination MAC addresses, source and destination IP addresses, UDP/TCP port numbers, and IP addresses. The protocol type and other information classify the data flow, and set the access control rules according to the data classification. You can set permit or deny, and then apply the rules to VLANs or physical ports; support the global ACL function, which expands the number of effective ACL entries, which is convenient The use and maintenance of customers.

Full QoS policy and Q-in-Q for campus or carrier network

The switch fully implements the DIFFSERV model, provides up to 8 QoS queues, supports DSCP/TOS/802.1P and other QoS methods, SP, SRR, WRR, WFQ and hybrid scheduling and other priority queue scheduling algorithms, which can achieve port speed limit QoS functions such as traffic shaping to meet customer network requirements for data processing priority; support port trust, configurable trust CoS, DSCP, IP priority, port priority, and modify the DSCP and CoS values of data packets; according to the port , VLAN, DSCP, IP priority, ACL table to classify the traffic, modify the DSCP and IP priority of the data packet, and specify different bandwidths to provide different service quality for voice/data/video transmission in the same network. Support QinQ function, encapsulate the user's private network VLAN tag in the public network VLAN tag, so that the message will pass through the backbone network with two layers of VLAN tag to realize the intercommunication of the user's private network.

Normas

Model

S5710-12TX

S5710-28TX

S5710-28TX-P

S5710-54TX

Port

8*1G RJ45

4 *10G SFP+

24*1G RJ45

4 *10G SFP+

24*1G RJ45/PoE

4 *10G SFP+

48*1G RJ45

6 *10G SFP+

Chipset

RTL9301

RTL9301

RTL9301

RTL9311

Switching capacity

128Gbps

128Gbps

128Gbps

216Gbps

forwarding rate

95Mbps

95Mbps

95Mbps

160Mbps

MAC

16K

16K

16K

32K

Multicast

1K

1K

1K

4K

ARP table

2K

2K

2K

8K

Routing table

512

512

512

12K

PoE budget

N/A

N/A

400W(af/at)

N/A

Memory

Memory:512MB, storage:32MB

Power supply

AC: 100~240V 47/63Hz;

Power consumption

≤22W

≤22W

≤450W

≤30W

Dimensions
(WxDxH)

260X210X44mm

440X210X44mm

440X270X44mm

440×290×44mm

Temperature

Working Temperature:-10℃~55℃

Storge temperature:-40℃~70℃

Humidity

Operating humidity: 10%~95% (non-condensing)

Storage humidity: 10%~95% (non-condensing)  

 

Software

Specification

S5710-12TX

/28TX(P)

S5710-54TX

 

Ethernet

Ethernet interface operating modes(full duplex, half duplex, and auto-negotiation)

●

●

Ethernet interface operating rates

●

●

Jumbo Frame

●

●

Port enable/disable

●

●

Flow-control tx/rx

●

●

Port based storm-control

●

●

Unknow-unicast/unknow-multicast/broadcast storm-control

●

●

Port-isolate

●

●

Cut-through

●

●

VLAN

Access/Trunk/Hybrid

●

●

4K VLAN

●

●

Default VLAN

●

●

VLAN Classification(port based/mac based/ip based/protocal based)

●

●

Basic QinQ

●

●

Flexible QinQ

●

●

VLAN Swap

●

●

MAC

Automatic learning and aging of MAC addresses

●

●

Hardware Learning

●

●

Static and dynamic  MAC address entries

●

●

blackhole MAC

●

●

LAG

Static-LAG & LACP

●

●

LAG load balance(SIP/DIP/SMAC/DMAC)

●

●

STP

Spanning-Tree Protocol

●

●

Rapid Spanning-Tree Protocol

●

●

Multi-instance Spanning-Tree Protocol

●

●

BPDU Filter/Guard

●

●

Root Guard

●

●

Loop Guard

●

●

ERPS

Single Ring

●

●

Sub Ring

●

●

Loopback Detect

Loopback-detection

●

●

Layer2 Multicast

IGMPv1/v2/v3 Snooping

●

●

Fast leave

●

●

Static IGMP snooping group

●

●

MVR(Multicast VLAN Registration)

●

●

ARP

Static and dynamic ARP entries

●

●

Aging of ARP entries

●

●

Gratuitous ARP

●

●

basic ARP-Proxy

●

●

local ARP-Proxy

●

●

IPv4 Unicast Routing

IPv4 Static Routes

●

●

uRPF check

●

●

RIPv1/v2

●

●

OSPFv2

●

●

IS-IS

N/A

●

BGP

N/A

●

ICMP redirect

●

●

ICMP unreachables

●

●

ECMP

●

●

IPv4 Multicast Routing

IGMPv1/v2/v3

●

●

IGMP-Proxy

●

●

IGMP SSM Mapping

●

●

PIM-SM

N/A

●

PIM-SSM

N/A

●

PIM-DM

N/A

●

IPv6 Basic Protocol

ICMPv6

N/A

●

NDP

N/A

●

PMTU

N/A

●

IPv6 Unicast Routing

IPv6 Static Routes

●

●

RIPng

●

●

BGP4+

N/A

●

OSPFv3

●

●

IS-IS

N/A

●

IPv6 Multicast Routing

MLD v1/v2

N/A

●

MLD v1/v2 Snooping

N/A

●

BFD

BFD for OSPFv2

N/A

●

Stacking

Virtual Stacking Frame

●

●

Max support 8 stacking units

●

●

VRRP

VRRP

●

●

Track for VRRP

●

●

Smart Link

FlexLink

●

●

Monitorlink

●

●

EFM

Auto detection

●

●

Network fault detetion

●

●

Network fault handle

●

●

remote loopback

●

●

CFM

Hardware CCM detect

●

●

MAC Ping

●

●

MAC Trace

●

●

Y.1731

Latency and jitter measure

●

●

QoS

Traffic classification based on COS/DSCP (simple classification)

●

●

Traffic classification based on ACL ( complex classification)

●

●

Traffic classification based on inner header of the tunnel packets

●

●

Queue scheduling

●

●

Remark the priority fields(COS/DSCP) of the packet based on ACL

●

●

Flow redirection

●

●

Flow mirror

●

●

Traffic policing based on direction(in/out)  of Port

●

●

Traffic policing based on direction(in/out) of VLAN

●

●

Traffic policing based on direction(in/out) of flow

●

●

Traffic policing based on direction(in/out) of aggregated flow

●

●

Queue based traffic shaping

●

●

Port based traffic shaping

●

●

SP(Strict Priority)scheduling

●

●

WRR(Weighted Round Robin)scheduling

●

●

SP + WRR mixed scheduling

●

●

Packet counts and bytes statistics based on traffic classification

●

●

Packet counts and bytes statistics based on the color after traffic policing

●

●

Forwarded and discarded packet counts and bytes statistics

●

●

System Security

SSHv1/v2

●

●

RADIUS

●

●

TACACS+

●

●

Authentication

●

●

Accounting

●

●

Port based dot1x

●

●

MAC based dot1x

●

●

MAC/IP ACL

●

●

Basic Mode ACL

●

●

Port/VLAN/L4-Port ACL

●

●

Time Range

●

●

ARP Inspection

●

●

IP Source Guard

●

●

Limitation on MAC address learning on interface

●

●

Limitation on MAC address learning on VLAN

●

●

Rate limit

●

●

CPU Traffic Limit

●

●

Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood)

●

●

CLI/WEB/SNMP/Telnet/SSH filtering

●

●

Network Management

DHCP Server

●

●

DHCP Relay

●

●

DHCP Snooping

●

●

DHCP Option60

●

●

DHCP Option82

●

●

RMON

●

●

RFC3176 sFlow

●

●

SNTP(Simple Network Time Protocol)

●

●

LLDP

●

●

Terminal Services

Configurations through CLI (Command Line Interface)

●

●

Vty Terminal service

●

●

Console Terminal service

●

●

Configuration Management

Inband management interface and configuration

●

●

Outband management interface and configuration

●

●

privileged user proirity and privileged commands

●

●

Network management based on SNMPv1/v2c/v3

●

●

Public and private MIB

●

●

Public and private Trap

●

●

Configuration and management based on WEB

●

●

Restore factory default configuration

●

●

File System

File system

●

●

Upload and download files through FTP or TFTP

●

●

Upload and download files through Xmodem

●

●

Debugging And Maintenance

per-module Debug features

●

●

ICMP Debug

●

●

CPU usage display and  alarm

●

●

Memory  usage display and  alarm

●

●

Device temperature、PSU、FAN、status display and alarm

●

●

User operation logs

●

●

Management of logs, alarms, and debugging information

●

●

VCT(Virtual Cable Test)

●

●

Detailed Diagnostic-information collection

●

●

Manual reboot

●

●

Schedule Reboot

●

●

Reboot Information logging

●

●

Ping

●

●

IPv6 Ping

●

●

Traceroute

●

●

Port mirror

●

●

Flow mirror

●

●

Remote mirror

●

●

Multi-destination mirror(m:n)

●

●

To CPU/From CPU packets statistics

●

●

port loopback

●

●

hardware loopback(internal/external)

●

●

Time configuration

●

●

Timezone

●

●

Upgrade

upgrade with the local image file

●

●

upgrade with the remote TFTP server

●

●

Online upgrade Uboot

●

●

 

 Ordering Information

Ethernet Switch

S5710-12TX

Layer3 8-port Ethernet access switch, 8* 10/100/1000M Base-T RJ45 port and 4* SFP/10G SFP+ port, 1* Fixed AC: 100~240V, 11”1U Rack-mount

S5710-28TX

Layer3 24-port Ethernet access switch, 24* 10/100/1000M Base-T RJ45 port and 4* SFP/10G SFP+ port, 1* Fixed AC: 100~240V, 19”1U Rack-mount

S5710-28TX-P

Layer3 24-port Ethernet PoE switch, 24* 10/100/1000M Base-T RJ45 PoE port and 4* SFP/10G SFP+ port,IEEE 802.3af/at,PoE budget: 400W, 1* Fixed AC: 100~240V, 19”1U Rack-mount

S5710-54TX

Layer3 48-port Ethernet access switch, 48* 10/100/1000M Base-T RJ45 port and 6* SFP/10G SFP+ port, 1* Fixed AC: 100~240V, 19”1U Rack-mount

Optic Fiber Module

SFP-RJ45

1000M SFP module, RJ45 port

SFP-M-LC-R5

1000M SFP module, multi-mode, 500M, 850nm, LC

SFP-S-LC-20

1000M SFP module, single-mode, 20km, 1310nm , LC

SFP-S-LC-40

1000M SFP module, single-mode, 40km, 1310nm, LC

SFP-S-LC-80

1000M SFP module, single-mode, 80km, 1550nm, LC

SFP+-M-LC-R3

10G SFP+ modules.multi-mode, 300M, 850nm, LC

 

Descargar

S4528X Datasheet